Gorilla Waterproof Caulk & Seal 100% Silicone Sealant 10oz Cartridge White (Pack of 1)
₨ 7,780
- SEALS OUT WATER, AIR & MOISTURE
- 30 MINUTE WATER READY
- INDOOR/OUTDOOR: All Weather
- 100% WATERPROOF – MOLD & MILDEW RESISTANT
- WON’T YELLOW, SHRINK OR CRACK
- AVAILABLE IN CLEAR AND WHITE
- GREAT FOR: Kitchen, Bath, Window, Door, Plumbing, Gutters, Auto, Marine and more!
Delivery Time 2 to 3 Weeks
Gorilla Waterproof Caulk & Seal 100% Silicone Sealant 10oz Cartridge White (Pack of 1)
- SEALS OUT WATER, AIR & MOISTURE
- 30 MINUTE WATER READY
- INDOOR/OUTDOOR: All Weather
- 100% WATERPROOF – MOLD & MILDEW RESISTANT
- WON’T YELLOW, SHRINK OR CRACK
- AVAILABLE IN CLEAR AND WHITE
- GREAT FOR: Kitchen, Bath, Window, Door, Plumbing, Gutters, Auto, Marine and more!
Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is mold & mildew resistant. This silicone sealant won’t yellow, shrink or crack over time!
**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.
TO OPEN:
Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.
TO USE:
All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
1) Insert into cartridge gun.
2) Apply sealant, pushing bead ahead of nozzle.
3) Smooth bead immediately after application, before skin forms.
30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.
STORAGE: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.
CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.
Click on the Gorilla link at the top of the page to see more Gorilla Tough products.
| Weight | 0.4 kg |
|---|
Brand
Gorilla
Related products
-
Add to cartChip built-in various protection mechanisms. Can be applied to electric vehicle controller, etc.
-
Add to cartThe non-adjustable fan is a 5 v direct fan motor, while the two-stall fan is the interior has a step-up circuit board.
-
Add to cartOne of the simplest and cheapest ways to incorporate temperature sensing into your Arduino project is to use a DS18B20 1-Wire Temperature Sensor.
-
Add to cartThis power supply is an isolated industrial-grade module power supply, with temperature protection.
-
Reviews
There are no reviews yet.